Polycarboxylate Superplasticizer (PCE)

PRODUCT INTRODUCTION

Polycarboxylate Superplasticizer (PCE) is a water-soluble concrete additive used to reduce water to cement ratio without affecting the workability of the mixture. PCE increases protection from slumping, then increases the slump retention since cement loses workability with time. PCE increases the structure’s strength after construction. It also improves early-strength in concrete while simultaneously lowering water content and retaining the original workability level. In wider application, PCE can be used as an emulsifier and a surfactant. 

Polycarboxylate-Superplasticizer-(PCE)

PROPERTIES

ItemDM-150 ADM-550 ATesting Method
AppearanceClear to Slightly Turbid LiquidClear to Slightly Turbid LiquidVisual
Solid Content (%)50 ± 150 ± 1Oven 150 °C, 15 minutes
pH6.0 – 7.03.0 – 5.0pH Meter
Viscosity (cPs)300 – 800 200 – 700 Brookfield LVT, Spindle No 2, 30 rpm @ 30 °C
Density (g/cm3)1.10 ± 0.021.10 ± 0.02Density Cup
Recommended Dosage0.2 – 0.8%0.2 – 0.8%Flow Table
PerformanceDosage 0.225%
0’ = 21 cm
30’ = 21 cm
60’ = 20 cm
Dosage 0.225%
0’ = 23 cm
30’ = 21 cm
60’ = 21 cm

Flow Table

 

PACKAGING

We have three options of packaging, 225 Kgs in plastic drum, 1,100 Kgs in IBC tank and 25 KL in ISO Tank.

SAFETY & HANDLING

Not to be taken internally. Practice the proper personal hygiene to avoid ingestion. FOR PROFESSIONAL USE ONLY. KEEP OUT OF REACH OF CHILDREN.

STORAGE

Store it in a temperature range of 5° to 40 °C with the receptacle tightly sealed. Open and handle receptacle carefully to prevent formation of aerosols. Avoid contact with eyes, skin and clothing.

BY APPLICATION

Construction

Superplasticizers are water-soluble organic substances that reduce the amount of water needed to achieve a certain concrete stability, reduce the water-cement ratio, and reduce cement consumption, increase slump and workability.
Produce high quality concrete, with low permeability (more impermeable to water).It can reduce water so that the water use becomes less, the distribution of cement particles in the fresh concrete mix becomes more optimal, which in turn produces the higher density concrete that can be more watertight. Construction for highways, railways, subways and tunnels. Also for self-compacting concrete, precast and pre-stressed concrete.

Gypsum Board

Superplasticizer can be used in the gypsum panel and plasterboard process. In mixing compound phase, a small amount of superplasticizer are used so that the slurry will flow during manufacture, and to reduce the water and hence the drying time.

Oil & Gas

Superplasticizer is used in pipe jacking method. Superplasticizer use is for water cut-off materials or durable and high resistance waterproofing membranes for shield tunneling method. PCE also can be added for mud withdrawal process to reduce viscosity and increase fluidity.

Synthetic Resin

Superplasticizers are used as a raw material in the production of emulsions, especially for waterproofing and cementitious applications.